One single Hausbrandt Epica® coffee, infusion and herbal tea machine
The first machine for domestic use that offers the possibility of perfectly preparing coffee, infusions and herbal teas, uses the innovative Epica® capsule system (Easy Peel Italian Capsule) , patented and produced by Hausbrandt. Design: Carlo Colombo.
1. Easy to use. One gesture, one button only
2. Saves energy and respects the environment thanks to the automatic stand-by function: consumption <0.5 W
3. Automatic ejection of the used capsule
4. Metal cup resting grid adjustable on two heights per cup and mug
5. Removable exhausted capsule collector drawer (capacity 12 capsules)
6. Removable, transparent water tank with attached lid (capacity 1000 cc)
7. LED lighting in the cup compartment and in the rear tank
“HG01” coffee machine
Supply | 220-240Vac 50 / 60Hz | |
Absorbed power | 1200W | |
Dimensions [P x H x L] | 295 x 300 x 165 mm | |
Weight | 3920 gr | |
Pump pressure | 20 Bar | |
Pre-heating time | 90 sec. | |
Water tank | Removable. Made of transparent material (SAN). With integral lid. Capacity: 900 cc | |
Container Capacity Exhausted Capsules | 12 pcs | |
Energy Saving function (intervention time) | 30 min | |
Coffee temperature (in cup) | 68 ° C – 78 ° C | |
Descaling Cycle Signaling | After 500 work cycles all the white LEDs start flashing (0.5 sec On and 0.5 sec OFF) until the Withdraw Button is kept pressed for at least 5 sec. | |
Maximum Supply Protection | 90sec. [250cc] | |
Open Chamber Dispensing Protection | Safety microswitch that prevents dispensing if the lever is not completely lowered | |
Luminous signals | Self-diagnostics | Tank 2 Flashes / Button (in succession) White – Red |
Fault detection: | Red button with rapid flashing (2Hz) | |
Heating: | Red Button | |
Ready Machine: | White Button | |
Supply: | Red Button | |
Energy Saving | Red button with slow flashing | |
Tank lighting: | Two white light spots | |
Cup Stand Lighting: | A white light spot | |
Power cord | Detachable with 90 ° connector. White color | |
Cup rests | Two positioning heights: Espresso Cup and Mug Mug. With metal grille. | |
Capsule Insertion Lever | Zamak alloy die-cast with galvanic chrome plating | |
Heater | Rapid type with electronic temperature stabilization using NTC probe and Aluminum flywheel. Water pipe in stainless steel |
Manufacturer: Fratelli Guzzini SpA – c.da Mattonata 60, 62019 Recanati (MC) Italy.
Reviews
There are no reviews yet.